How to park / resume a call

Park a call with Function / BLF key To park / resume a call via Function / BLF key is possible from Wildix VoIP phone or Collaboration -> Fn Keys: Press…

Yealink VC 200/500/800 – Adding a local contact by remote control

Adding a Local Contact by Remote Control Procedure ​1. On your remote control, go to Dial > Directory.2. Select Local from the drop-down menu.3. Select New Contact.4. Enter the contact name…

Yealink VC200/500/800 – Searching for contacts by remote control

Searching for Contacts by Remote 1. On your remote control, go to Dial > Directory.2. Enter a few or all characters of the contact name or numbers in the Search…

Yealink VC200/500/800 – Editing Numbers before Calling by Remote Control

1. Do one of the following: • On your remote control, go to Dial > History.• On your remote control, go to Dial.2. Select the desired history record and then press…

Yealink VC200/500/800 – Placing a call by entering a number

Dialling the Number by Remote  1. On your remote control, go to Dial.2. Optional: Select the desired call type from the Call Type drop-down menu.3. Enter the number.4. Press OK…

Yealink Cordless – Connecting the base station

Connecting the base station You have to options for power and network connection of the base station. Your system administrator will advise you which one to use. AC power Power…

Yealink Cordless – Charging the handset

To charge the handset:1. After setting up the handset and charger cradle. place the handset into the charge cradle. Battery charging status:The handset batteries take 6 hours to full charge.…

Yealink Cordless – How to transfer a call

To perform a transfer- 1. Press the options soft key during a call, and then select transfer. You can also press the ‘R’ key directly.2. Enter the number or select…

Yealink Cordless – Answering a call

Press the green call key or the accept soft key.When on the call press the speaker key to activate speakerphone

Yealink Cordless – Registering a handset

When the handset LCD screen prompts “Press base paging 2s then press Reg”, long press the button on the front of the base station which has a WiFi symbol on…

Yealink Cordless – Locating/paging to a handset

To locate/page to a handset:1. Press the button with the WiFi symbol on. All handsets that are registered to this base will ring (page) simultaneously and display the IP address…

Yealink Cordless – Turning the handset off/on

To turn the handset on: Do one of the following: Press the red call key until the LCD screen lights up. Place the handset in the charger cradle The handset…